Cut the pieces for the sides and the bottom. With the pocket hole jig set for 3/4″ material, drill pocket holes along the side edges of the bottom. Secure the bottom to the sides using glue and 1-1/4″ pocket hole screws.… See more

Cut the piece for the back and drill pocket holes in all four edges. Secure the back to the sides and bottom using glue and 1-1/4″ pocket hole screws. See more

Cut the piece for the top. Secure the top to the sides using glue and 1-1/2″ brad nails, then secure to the back using glue and 1-1/4″ pocket hole screws. See more

Cut the piece for the stretcher and drill pocket holes in each end. Secure the divider to the cabinet sides as shown, using glue and 1-1/4″ pocket hole screws. See more

Cut the pieces for the drawer boxes. Using a router and a 1/4″ straight bit, cut a 3/8″ deep groove located 1/4″ up from the bottom of each piece (this is so the drawer box bottoms can slide into place). Drill pocket hole… See more