The back and side plywood pieces have pocket holes. Drill pocket holes as shown in the picture using a Kreg Jig making sure the setting is set for ¾” wood thick… See more

Cut an 18 3/4″ x 29 1/4″ middle divider board using remaining ¾” plywood. The middle divider piece is basically used for holding the drawer slides and supporting the drawer… See more

Take 2×4 and cut two pieces at 60” in length. Both ends of the 2×4 will need to be cut at 30°, see picture. One-piece will be used at the front of the base and the other piece will b… See more

The front inside perimeter of the dresser will have a 1 ½” board all the way around. Measure and cut two long and two short boards with ¾” plywood as shown in the picture. Dril… See more